HP Aruba Certified Switching Associate (ACSA) HPE6-A41 問題集

HPシステムは、間違いなく認定市場のペースセッターです。今日は激しい市場での雇用者のなか競争、つまりは少ないムーラでより多くのスキルを雇います。総合的なスキルは、従業員の数が少ないから抽出することができるように、ネットワークのスキルにデスクトップおよびサーバーからのすべての分野で専門知識を持つITプロフェッショナルは、のために求められています。雇用者は認識名前をしたい、その1名です。認定の値は、知識とそれが包含されるスキルにあり、従って、直接それは、から来ている名前は、したがって、HPAruba Certified Switching Associate (ACSA)認定資格HPE6-A41試験過去問は、誰もが認めるリーダーのまま。
Share some Aruba Certified Switching Associate (ACSA) HPE6-A41 exam questions and answers below.
Refer to the Exhibit:

How can the network administrator find the interface that Switch-3 uses to forward traffic from the Client to the Server?

A. View the MAC forwarding table.

B. View the LLDP remote devices list.

C. View the IP routing table.

D. View the ARP table.

Answer: A

Refer to the Exhibit:

Exhibit 2 shows the IP routine tables for all the switches after the link between Switch-4 and Switch-2 failed ‘//’hen This link fails traffic between 10 1 3 0/24 and 10.1.2.0724 is disrupted

What should the network administrator do to ensure that this traffic continues to flow if this link fails in the future? (Assume that routes on Switch-1 and Switch-3 are correct.)

A. Add a route to 10.1.3.0/24 through 10.1.3 1 on Switch-4.

B. Add a route to 10.1.2.0/24 through 10.1.0.14 on Switch-2.

C. Add a route to 10.1.3.0/24 through 10.1.0.14 on Switch-2

D. Add a route to 10.1.2 0/24 through 10.1.2.1 on Switch-4.

Answer: C

What is one reason to configure a dynamic LACP link aggregation instead of a static link aggregation?

A. so that the link aggregation automatically chooses its operational key

B. so that the link aggregation can detect the system ID and operational key on the other side of each link

C. so that the link aggregation can automatically change a passive LACP interface to active mode

D. so that the link aggregation can include more interfaces with some interfaces on standby

Answer: D

On an ArubaOS switch, what is the difference between an SNMPv2c community with manager unrestricted rights and an SNMPv2 community with operator unrestricted rights?

A. The manager unrestricted community has read-write access to all managed objects on the switch; the operator unrestricted community has read-write access to some objects but not to any Config objects.

B. The manager unrestricted community uses the Telnet/SSH password assigned to the manager to authenticate SNMP servers: the operator unrestricted community uses the Telnet/SSH password assigned to the operator.

C. The manager unrestricted community has read-write access to the switch, but the operator unrestricted community has read-only access.

D. The manager unrestricted community uses encryption, but the operator unrestricted community uses plaintext communication

Answer: A

An ArubaOs switch has no passwords configured on it.

The network administrator then enters these commands:

Switch(config)# password cperator user-name admin1 plaintext mysecret1

Switch(config)# password manager user-name admin2 plaintext mysecret2

What is one task that the admin 1 user can log in to the switch and complete?

A. Mew interface status and statistics.

B. Back up a configuration.

C. Mew configuration files.

D. Enable an interface.

Answer: A

Refer to the Exhibit:

All switches are ArubaOS switches that currently have the default spanning tree priority. Switch-1 should be the root of the spanning tree If Switch-1 fails. Switch-2 should become root

Which configuration for spanning tree priorities ensures this behavior?

A. priority 15 on Switch-1 and priority 14 on Switch-2

B. priority 0 on Switch-1 and priority 15 on Switch-2

C. priority 0 on Switch-1 and priority 1 on Switch-2

D. priority 15 on Switch-1 and priority 9 on Switch-2

Answer: C

Refer to the Exhibit:

Based on this ArubaOS switch output, what can a network administrator determine about the spanning tree topology?

A. Port 2 is an edge port

B. Port 3 will become the root port if the current root port becomes unavailable.

C. Switch-C is the root bridge of the topology.

D. Trk1 offers the lowest cost path to the common spanning tree root.

Answer: D

A network administrator manages an ArubaOS switch through the CLI The administrator needs to configure an untagged VLAN assignment on a range of interfaces.

How should the administrator enter the untagged command to complete this configuration?

A. Create a manual, named interface range Then access the context for the range and specify the VLAN ID with the untagged command.

B. Access the context for a range of interfaces and specify the VLAN ID with the untagged command

C. Access the individual context for each of the interfaces and specify the VLAN ID with the untagged command

D. Access the VLAN context and specify a range of interfaces with the untagged command.

Answer: A

Aruba Certified Switching Associate (ACSA)認定資格などの様々な認定試験があります。しかし、もしHPE6-A41試験参考書を取りたいなら、KtestのHPE6-A41試験参考書は勉強者を願望を達成させることができます。試験の受験に自信を持たないので諦めることをしないでください。KtestのAruba Certified Switching Associate (ACSA)資格試験参考書を利用することを通して自分の目標を達成することができますから。Aruba Certified Switching Associate (ACSA)資格を入手してから、他のIT認定試験を受験することもできます。Ktestの試験問題集を手にすると、どのような試験でも問題ではありません。KtestはHPのHPE6-A41試験参考書についてすべて資料を提供するの唯一サイトでございます。受験者はKtestが提供した資料を利用してHPE6-A41試験参考書は問題にならないだけでなく、高い点数も合格することができます。

受験者は筆記試験に合格した後、対応するハンズオンラボApplying Aruba Switching Fundamentals for Mobility試験に合格する必要があります。Aruba Certified Switching Associate (ACSA)認定資格HPE6-A41試験のブループリントに掲載されているトピックについて深い理解を有していることが望ましく、数年の実務経験を経てから受験することを強く推奨します。KtestAruba Certified Switching Associate (ACSA)認定資格HPE6-A41試験は、企業における信頼性の高いセキュリティシステムを配備管理するために必要な知識とスキルを、技術者に取得してもらうことを目的としています。Ktest HPE6-A41試験では、Aruba Certified Switching Associate (ACSA)認定を構成するために必要なスキルを検証します。HPE6-A41試験はトランザクションとそこで生成されるデータに対し、可視性と信頼性を得ることができます。

HP Aruba Certified Switching Associate (ACSA) HPE6-A41 問題集

IT認定試験は現在の社会で、特にIT業界で最も人気のある試験だと考えられています。IT認定試験の認証資格は国際社会で広く認可されています。昇進したく、昇給したく、あるいは単に自分の仕事スキルを向上させたいなら、IT認定Applying Aruba Switching Fundamentals for Mobility試験を受験して資格を取得するのはあなたの最もよい選択です。どうですか。勉強者もきっとそう思うでしょう。ですから、躊躇しないではやく試験を申し込みましょう。HPのHPE6-A41試験問題集は最近最も人気のある試験ですから、受験したいのですか。試験に準備する方法がわからない場合、Ktestは教えてあげます。

HPE6-A41資格問題集は、HPE6-A41の仮想化ソリューションを網羅した深い知識を有することを証明するのは資格なんです。Aruba Certified Switching Associate (ACSA)資格を取得するエンジニア試験HPE6-A41に合格するプログラム参加に同意するHPHPE6-A41資格を取得することで、IT仮想化技術者は、実際に管理設計運用設計をするうえで必要とされる能力を高め、証明することができます。HPE6-A41試験参考書はすべての知識を完全に含んで、勉強者が気楽に試験のパスことを保証できます。もし、HPAruba Certified Switching Associate (ACSA)資格を認定したら、Ktestが受験者は自分の目標を達成するには助ける。受験者の認定試験に合格した需要、Ktestが受験者は高品質の問題集と本格的なテストを提供し、受験者が気楽に認定試験に合格したことを助けるんです。


Share some Aruba Certified Switching Associate (ACSA) HPE6-A41 exam questions and answers below.
A network administrator suspects that interfaces in a link aggregation have been accidentally connected to multiple switches. The administrator wants to find the hostnames of the switches on the other side of the interfaces.

How can the administrator find this information?

A. Use the show lace command to view LACP information.

B. Use the show trunks command to view link aggregation information.

C. Use the show interface command to view detailed interface status.

D. Use the show lldp info remote-device command to view LLDP information.

Answer: D

Refer to the Exhibit:

Exhibit 2 shows the IP routine tables for all the switches after the link between Switch-4 and Switch-2 failed ‘//’hen This link fails traffic between 10 1 3 0/24 and 10.1.2.0724 is disrupted

What should the network administrator do to ensure that this traffic continues to flow if this link fails in the future? (Assume that routes on Switch-1 and Switch-3 are correct.)

A. Add a route to 10.1.3.0/24 through 10.1.3 1 on Switch-4.

B. Add a route to 10.1.2.0/24 through 10.1.0.14 on Switch-2.

C. Add a route to 10.1.3.0/24 through 10.1.0.14 on Switch-2

D. Add a route to 10.1.2 0/24 through 10.1.2.1 on Switch-4.

Answer: C

A network has ArubaOS switches and an Aruba Instant cluster with IP addresses on 10.1.255.0/24

The network administrator wants to manage the devices in Aruba AirWave. The administrator uses the SNMP credentials configured on the switches to create a scan set for 10.1.255.0/24. The scan discovers the switches but not the Instant cluster.

What should the administrator do to discover the cluster in AirWave?

A. Re-configure the scan set to use the Aruba Instant default SNMPv3 user admin

B. Configure SNMP credentials in the Instant UI.

C. Specify the AirWave IP address in the Instant UI System> Admin settings.

D. Install the Instant cluster self-signed certificate on AirWave.

Answer: C

On an ArubaOS switch, what is the difference between an SNMPv2c community with manager unrestricted rights and an SNMPv2 community with operator unrestricted rights?

A. The manager unrestricted community has read-write access to all managed objects on the switch; the operator unrestricted community has read-write access to some objects but not to any Config objects.

B. The manager unrestricted community uses the Telnet/SSH password assigned to the manager to authenticate SNMP servers: the operator unrestricted community uses the Telnet/SSH password assigned to the operator.

C. The manager unrestricted community has read-write access to the switch, but the operator unrestricted community has read-only access.

D. The manager unrestricted community uses encryption, but the operator unrestricted community uses plaintext communication

Answer: A

A network administrator manages an ArubaOS switch through the CLI The administrator needs to configure an untagged VLAN assignment on a range of interfaces.

How should the administrator enter the untagged command to complete this configuration?

A. Create a manual, named interface range Then access the context for the range and specify the VLAN ID with the untagged command.

B. Access the context for a range of interfaces and specify the VLAN ID with the untagged command

C. Access the individual context for each of the interfaces and specify the VLAN ID with the untagged command

D. Access the VLAN context and specify a range of interfaces with the untagged command.

Answer: A

Refer to the Exhibit:

What is the result of this configuration?

A. The switch only adds the last static route entry to the routing table

B. All four routes are added to the routing table, but are never used.

C. The switch load shares connections across the four static next hops.

D. The switch only adds the last two static route entries to the routing table.

Answer: C

A company has a cluster of Aruba Instant APs (IAPs). The company wants to add a new IAP to the cluster.

What should network administrators ensure before they connect the new IAP?

A. that the new IAP has been provisioned with an IP address and the IP address of the cluster virtual controller (VC)

B. that the switch port for the AP is untagged for the same VLAN as the current cluster

C. that Aruba Activate is configured with provisioning rules for the IAP

D. that the DHCP server has the correct options 60 and 43

Answer: B

Refer to the Exhibit:

After the administrator enters this command, packets arrive that are destined for 10.1.8.8 and 10.1.8.13

What does the switch do with this traffic?

A. It forwards all of the traffic to 10.1.101.1.

B. It load balances some of the traffic 10.1.101.1 and some to 10.1.104.2.

C. It forwards all of the traffic to 10.1.104.2.

D. It drops the traffic.

Answer: B

Ktest HPE6-A41試験では、Aruba Certified Switching Associate (ACSA)認定を構成するために必要なスキルを検証します。HPE6-A41試験はIT環境を管理し、安全確保を行うための手段を提供することで、勉強者がITサービスを柔軟に行えるよう支援しています。Ktestは一番人気があるサイトの一つで、Aruba Certified Switching Associate (ACSA)認定の分野にとても有名です。